All Posts

Setting PVS vDisk Boot Menu Default Option

You may have noticed in the latest version of PVS that when you have a PVS device type set to “Test” or “Maintenance” you will be prompted for the version to boot.

Below describes how to enable the first menu option as the default boot choice without prompting when vDisk boot menu appears if you have multiple vDisk

Complete the following steps to enable the menu option:

Continue reading “Setting PVS vDisk Boot Menu Default Option”

Advertisements

PVS 6.1 Rebalance and Load Balancing not working

When you check your PVS replication status you see that some/all of your PVS Servers are missing from the replication status window and/or your load balancing “favours” a single device

This happen when the PVS servers cannot communicate properly with each other on multi-homed servers.

Adding the following reg entry will resolve this by forcing the soap/stream services to use the correct interface/IP address

Continue reading “PVS 6.1 Rebalance and Load Balancing not working”

Increase ARP cache entries Lifespan for PVS 6.1 Servers

The default lifespan of ARP cache entries was lowered from 10min in Windows Server 2003 to a random value between 15 and 45sec in Vista/W2K8. As a result, the PVS bootstraps are twenty times more likely to experience a timeout during a Vista/W2K8 boot.

The workaround is to increase the ARP cache entry lifespan for PVS-bound NIC’s:

Continue reading “Increase ARP cache entries Lifespan for PVS 6.1 Servers”

Enable Alt+Tab Toggling in a Windowed Desktop Session

1. Open regedit on the client device to edit the registry

2. Navigate to the key (Wow6432Node for 64bit systems)
HKEY_LOCAL_MACHINE SOFTWARECitrixICAClientEngineLockdown ProfilesAll RegionsLockdownVirtual ChannelsKeyboard
3. Open Key: TransparentKeyPassthrough
4. Set the value to: Remote

Continue reading “Enable Alt+Tab Toggling in a Windowed Desktop Session”

Managing wireless network profiles in Windows 8

Task
Instructions

Delete a profile

At the command prompt, type:

netsh wlan delete profile name=”ProfileName”

Show all wireless profiles on the PC

At the command prompt, type:

netsh wlan show profiles

Show a security key

At the command prompt, type:

netsh wlan show profile name=“ProfileName” key=clear

Move a network up in the priority list

Connecting to a new network and choosing Connect automatically will place it at the top of the list.

Stop automatically connecting to a network within range

Tap or click the network in the network list, then clickDisconnect.

Stop automatically connecting to a network that’s out of range

At the command prompt, type:

netsh wlan set profileparameter name=”ProfileName” connectionmode=manual