Managing wireless network profiles in Windows 8

Task
Instructions

Delete a profile

At the command prompt, type:

netsh wlan delete profile name=”ProfileName”

Show all wireless profiles on the PC

At the command prompt, type:

netsh wlan show profiles

Show a security key

At the command prompt, type:

netsh wlan show profile name=“ProfileName” key=clear

Move a network up in the priority list

Connecting to a new network and choosing Connect automatically will place it at the top of the list.

Stop automatically connecting to a network within range

Tap or click the network in the network list, then clickDisconnect.

Stop automatically connecting to a network that’s out of range

At the command prompt, type:

netsh wlan set profileparameter name=”ProfileName” connectionmode=manual

PerfMon problems – Unable to Add Counters

Opening Performance in Server manager displays on a Windows 2008 R2 server with XenApp6.5

“Unable to add these counters:

MemoryAvailable MBytes
Memory% Committed Bytes In Use
MemoryCache Faults/sec
MemoryCache Faults/sec
PhysicalDisk(*)%Idle Time
PhysicalDisk(*)Avg. Disk Queue Length
Network Interface(*)Bytes Total/sec”

Continue reading “PerfMon problems – Unable to Add Counters”

Installing debian on the SS4000-E

This Article is still in progress

Installing Debian

To boot the installer, you will need a serial nullmodem cable; a computer with a serial port; and a ribbon cable with a male DB9 connector at one end, and a 10-pin .1″ IDC header at the other and an active http server.

01-03-2014 12-03-06

NB: Cable Connection Layout

Continue reading “Installing debian on the SS4000-E”